Do you have Plexidor® pet doors for a wall?
The best pet door for a wall is the Plexidor® Performance Pet Door . It is a construction grade pet door and has a good weather seal. You can put most pet doors through walls.

Do you have Plexidor® pet doors for windows?
No. The Plexidors® are designed to go through a wall or house door. The Plexidor® line can be put through any type of house door, wood, steel, fiberglass, etc. and any type of wall, 2x4 stud walls, 2x6 stud walls, brick veneer walls, block walls, and yes even 24" walls of southern Arizona. Enter your zip code or postal code above to locate a dealer near you. You may install the door your self or the local dealer can install the pet door for you.

Do you make Plexidor® pet doors for french doors?
Yes and No. The Plexidor®pet doors can be installed in french doors. If the pane of glass are individual panes you can remove them as needed. But, if the door has one large sheet of glass with a muton grill on top, you can not cut this glass. It is tempered and will break into many small pieces if you try to cut it. Another option is to replace the door slab with one that is glass above and door material below.

Is it difficult to train a pet to use a Plexidor® pet door?
No. Most cats and dogs learn how to use a Plexidor® pet door in 2 seconds to 2 weeks. Do not push the pet through the Plexidor®. Try and coax your pet through with a treat.

Can my cat use a Plexidor® that is large for my dog?
Yes, most cats will use up to a large Plexidor®. If you have a medium size dog, you may need to go up in size to a large to keep the top of the door high enough for the dog (shoulder height) and to bottom low enough for the cat (approximately 5" off the floor.)

Can I Paint my Plexidor®?
Yes, just sand the frame, prime and paint. But, try our white. It is a baked on finish like your stove.